Sonoscape E1 User Manual

6 Acquiring Images
Basic User Manual 93
1. Press the function key to select Steer.
2. Rotate the function key to adjust the settings.
NOTE:
Only the linear probes are available when adjusting the steer.
■ Simult
Simult is used to synchronously display two real time scans in the B mode and the PW
modes.
To enable or disable the feature:
1. Press the function key to select Simult in the activate PW or inactivated PW 2 mode.
2. Rotate the function key to enable or disable the feature.
NOTE:
Simult
is only available in the PW mode.
■ Auto Trace
Auto trace measurement in the spectral Doppler mode is used to measure the velocity,
Pressure Gradient (PG) or other indexes for clinical diagnosis purposes while the system
automatically traces one or more Doppler waveforms.
To enable or disable auto trace:
1. Press the function key to select Auto Trace.
2. Rotate the function key to enable or disable the feature.

Sonoscape E1 Specifications

General

Type	Portable Ultrasound System
Display	15-inch LCD
Transducer Ports	2
Cine Loop	Yes
Imaging Modes	Color Doppler, Power Doppler
Applications	Obstetrics, Gynecology, Vascular, Musculoskeletal
Probe Connectors	2
Ports	VGA, USB, Ethernet
Supported Probes	Convex, Linear, Phased Array