9 Working with DICOM
118 Basic User Manual
a. Move the cursor to the desired image or cine, and press the confirm key.
Click the or icon to go to the previous or the next page of the image and cine
box. Click the icon to select all images or cines.
b. Select desired exam type from the Exam Type drop-down list and click Import.
The selected patient information and the corresponding images or cines will be
imported into the system.
9.6 MPPS
MPPS is used to send exam status information to the MPPS server, which facilitates the
other systems to obtain the exam progress in time.
The status information is described as below:
●
When the exam is started, the system sends the status information “In Process” to the
MPPS server.
●
When the exam is completed by pressing the End Exam button on the control panel,
the system sends the status information Complete or Discontinue to the MPPS server.
If you want to check the status items sent to the MMPS server, choose the Patient button >
Patient List > DICOM Queue.
You can add MPPS manually to check the processing status of the discontinued exam or
other order operations.
NOTE:
MPPS can only be added when you perform the scan or other order operations.
Perform the following steps.
1. Choose the Patient button > Patient List to enter the Patient Review screen.
2. Click PPS Screen to enter the PPS screen.
To Next Page
Loading...
Need help?
General
