Sonoscape E1 User Manual

8 Managing Images/Data
Basic User Manual 111
8.4 Importing Data to the System
NOTE:
• Only data generated by this system can be imported.
• Ensure the current exam is completed before you import data. Otherwise, you
may have a failure data import.
Perform the following steps.
1. Connect the USB drive to the system.
2. Select the Patient key > Patient List > Patient View to enter the Patient View
screen.
3. Click Import Screen.
View Import Patient
Delete Patient
Patient Review
Patient ID
20150505 Mary Unknown 2015/05/05-16:04:03 40.82M
Patient Name Birth Date Sex Exam Time Image Size Status
Import Screen
Patient ID
Last Name First Name Age Sex
Date --
11/9/2017 11/9/2017
Exit
Reset
Import
Figure 8-2 Import Screen
4. Select a USB drive from the drop-down list and select the imported patient
information.
5. Click Import Patient to import the desired data.

Sonoscape E1 Specifications

General

Type	Portable Ultrasound System
Display	15-inch LCD
Transducer Ports	2
Cine Loop	Yes
Imaging Modes	Color Doppler, Power Doppler
Applications	Obstetrics, Gynecology, Vascular, Musculoskeletal
Probe Connectors	2
Ports	VGA, USB, Ethernet
Supported Probes	Convex, Linear, Phased Array