1 Safety
8 Basic User Manual
The maximum surface temperature of the endocavitary probes is 43°C. To protect the
patient against the harm of excessive temperature, the probe stops working automatically
when its temperature reaches the limit. The surface temperature of the probe is displayed
on the screen.
PAT 37°C Patient Temperature
Transducer Tip TemperatureTIP <28°C
1.3.5 Imaging Functions that Change Acoustic Output
The qualified operator may use the system controls to limit the ultrasound output and to
adjust the quality of the images. The operator should observe the acoustic output display
for possible effects.
There are three categories of system controls relative to output. They are controls that
have direct effect on the output, controls that indirectly control output and controls that are
receiver controls.
1.4 Safety Symbols
The following table is provided for your identification of important symbols located in
labels on the system.
Symbol Meaning
Caution
Dangerous voltage
Risk of explosion if used in the presence of flammable
anesthetics.
0197
This product is provided with a CE marking in accordance with
the regulations stated in Council Directive 93/42/EEC
Authorized representative in the European community
Type BF Applied Part
Power On/Off button
To Next Page
Loading...
Need help?
General
