Sonoscape E1 User Manual

4 Customizing Your System
48 Basic User Manual
Item Description
CUA/AUA Set to display CUA or AUA on the measurement report.
CUA stands for Composite Ultrasound Age, and AUA stands
for Average Ultrasound Age.
Add 1 week to EDD Set to add one week to EDD.
Show EDD on screen Set to display EDD in the measured result box.
Estimation Set the formula to estimate EFW.
If it is set to None, the system will not estimate fetal weight
and no corresponding value displays on the measurement
report.
Age by EFW Set the formula to estimate GA by EFW.
If it is set to None, the system will not estimate GA by
EFW and no corresponding values will be displayed on the
measurement report.
EFW GP/SD Set the formula of the fetal growth curve.
If it is set to None, no values of the fetal growth curve are
displayed on the measurement report.
Unit Set the weight unit.
CUA Set the CUA formula.
If it is set to None, the system will not estimate CUA and no
corresponding values are displayed on the measurement report.
You can customize the formula for gestational age and growth curve.
Perform the following steps as follows:
1. Click New Table to pop up the New Table dialog box.
2. Select New GA Table or New Growth Table and click OK. The screen shown in
Figure 4-12 or Figure 4-13 pops up.

Sonoscape E1 Specifications

General

Type	Portable Ultrasound System
Display	15-inch LCD
Transducer Ports	2
Cine Loop	Yes
Imaging Modes	Color Doppler, Power Doppler
Applications	Obstetrics, Gynecology, Vascular, Musculoskeletal
Probe Connectors	2
Ports	VGA, USB, Ethernet
Supported Probes	Convex, Linear, Phased Array