EasyManua.ls Logo

SonoSite iLook - Software Licensing; Attaching the Handle Pad

SonoSite iLook
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 Chapter 1: Introduction
Introduction
Software Licensing
The system is shipped with a valid license number. For further questions, contact technical support.
USA/Canada Customers: 1-877-657-8118
International Customers: Contact your local representative or +1-425-951-1330.
Attaching the Handle Pad
The size of the handle opening can be customized to provide maximum support and comfort. Three
options are available: no pad, the small handle pad, or the large handle pad. The small handle pad
is installed and is suitable for most hand sizes. SonoSite recommends using the large handle pad if
your hands are small or using no pad if your hands are large. Select the option that provides the best
support and comfort for your hand size.
To remove or change the handle pad:
1 Verify system is turned off.
2 Lay the system on a flat surface with the display side down.
3 Using a #2 Phillips screwdriver, remove the screws from the handle pad.
4 Pull the handle pad out.
5 Insert the new pad and securely fasten.

Table of Contents

Related product manuals