18 Chapter 2: Getting Started
Getting Started
To enter license number:
1 Press the Patient key.
2 Select or tap System Set-up... from the on-screen menu.
3 Select or tap Next Page from the on-screen menu.
4 Select or tap System Info... from the on-screen menu.
5 Select or tap License.
6 Select or tap the on-screen keyboard to enter the license number.
Note: The system does not accept invalid numbers. See “Troubleshooting” on page 57.
7 Select or tap Done to accept change or Cancel to exit the keyboard and return to the previous
menu.
To calibrate the touch screen:
Note: Calibrate the touch screen after changing video format or if the touch screen is misaligned.
1 Press the Patient key.
2 Select or tap System Set-up... from the on-screen menu.
3 Select or tap Next Page from the on-screen menu.
4 Select or tap System Info... from the on-screen menu.
5 Select or tap Calibration from the on-screen menu.
A confirmation dialog appears.
6 Select Yes to proceed, or select No to cancel.
7 Tap the center of each cursor that appears.
Note: If the cursor is not precisely tapped, an error message will appear prompting
Confirmation
invalid. Please try again.
8 Press or tap Done to return to the previous menu or press the Patient key to return to live
imaging.
Date/Time 1 Select or tap Date/Time from the menu. See “On-Screen Keyboard” on
page 14.
2 Enter the current date (yyyy/mm/dd) and time using the on-screen
keyboard.
Note: If you make a mistake, use the arrow and backspace keys.
3 Select or tap Cancel to ignore the changes and return to the previous menu.
4 Select or tap Done to accept the changes and return to the previous menu.
System Info Select or tap System Info from the menu to enter a license number, to calibrate
the touch screen, or to view system information.
Done Select or tap Done from the menu to exit System Set-up or press the Patient key
to return to live imaging.
To Next Page
Loading...
