SonoSite S-Cath - Connectivity Setup; Date and Time Setup; Display Information Setup; Network Status Setup

Chapter 2: System Setup 15
Setup
To specify cardiac measurement names
 UnderTDI WallsontheCardiacCalculations
setuppage,selectanameforeachwall.
Connectivity setup
OntheConnectivitysetuppage,youselect
optionsforusingdevicesandforalertswhen
internalstorageisfull.Youalsoimportwireless
certificatesandspecifysettings(including
TransferModeandLocation)forSiteLink
™
ImageManagerandDICOM
®
,whichareoptional
features.RefertotheSiteLinkandDICOM
documentation.
To configure the system for a printer
1 Setuptheprinterhardware.(Seeins truct ions 
includedwiththeprinterorstand.)
2 OntheConnectivitysetuppage,clickthe
printerinthePrinterlist.
To configure the system for a DVD recorder
or serial bar code scanner
1 OntheConnectivitysetuppage,dothe
following:
•(DVDrecorder)IntheVideo Modelist,
clickthevideostandard:NTSCorPAL.
•(Barcodescanner)IntheSerial Portlist,
clickBar Code Scanner.
Note: Becausetheseperipheralsusethesame
RS‐232connectoronthesystem,youcan
connectonlyoneofthemata
time.
2 Restartthesyst em.
3 Attachaserialcable(RS‐232)fromtheRS‐232
connectoronthebackofthesystemto
theperipheral.
To receive storage alerts
 OntheConnectivitysetuppage,select
Internal Storage Capacity Alert.
Thesystemdisplaysamessageifinternal
storageisnearcapacitywhenyouendan
exam.
Date and Time setup
To set the date and time
 OntheDateandTimesetuppage,dothe
following:
•IntheDate box,typethecurrentdate.(See
“Enteringtext”onpage 7.)
•IntheTime box,typethecurrenttimein
24 hourformat(hoursandminutes).
Display Information setup
OntheDisplayInformationsetuppage,youcan
specifywhichdetailsappearon‐screenduring
imaging.Youcanselectcheckboxesinthe
followingsections:
Patient Header: Informationfromthe patient
informationform.(See“Patientinformation
form”onpage 27.)
Mode Data:Imaginginformation.
System Status:Power,battery,connectivity,and
similarinformation.
Network Status setup
TheNetworkStatussetuppagedisplays
informationonsystemIPaddress,Location,
EthernetMACaddress,andthewireless
connectionifany.