SonoSite S-Cath - Patient Information Form

Chapter 3: Imaging 27
Imaging
•Click,andthentypetext.See“Entering
text”onpage 7.
•Press Label,andthenpressthe desired
labelgroup: , ,or .Pressthe
groupagaintoselectthedesiredlabel.
Thefirstnumbershowswhichlabelinthe
groupisselected.Thesecondnumberis
thenumberoflabels
available.
See“Annotationssetup”onpage 13.
Toreturntothepreviousscreen,pressthe
Back knob.
To reset the home position
1 PressOptionsandselect Annotate.Agreen
cursorappears.
2 Usingthetouchpad,positionthecursor
wheredesired.
3 PressHome/Set.
Toreturntothepreviousscreen,pressthe
Back knob.
To place an arrow on an image
Youcanaddanarrowgraphictopointouta
specificpartoftheimage.
1 PressOptionsandselect Annotate.
2 PressArrow.
3 Ifyouwanttorotatethearrow,clickandthen
usethetouchpad.Whentheorientationis
correct,clickagain.
4 Usingthe touchpad,positionthearrowwhere
desired.
5
PressBackor2D tosetthearrow.
Thearrowchangesfromgreentowhite.
Toremovethearrow,pressArrowandthenpress
Hide.Press Showtodisplayitagain.
Toreturntothepreviousscreen,pressthe
Back knob.
To place a pictograph on an image
Thepictographsetavailabledependson
transducerandexamtype.
1 PressOptionsandselect Annotate.
2 PressPicto.
3 Press x/x todisplaythedesired
pictograph,andthenclick.
Thefirstnumbershowswhichpictographin
thesetisselected.Thesecondnumberisthe
numberofpictographsavailable.
4 Usingthetouchpad,position
thepictograph
marker.
5 Ifyouwanttorotatethepictographmarker,
clickandthenusethetouchpad.
6 Pressascreenlocationforthepictograph:
U/L(Up/Left),D/L(Down/Left),
D/R(Down/Right),U/R(Up/Right).
Toremovethepictograph,pressHide.Press
Showtodisplayitagain.
Toreturntothepreviousscreen,pressthe

Back knob.
Patient information form
Thepatientinformationformletsyouenter
patientidentification,exam,andclinical
informationforthepatientexam.This
informationautomaticallyappearsinthepatient
report.
Whenyoucreateanewpatientinformationform,
allimagesandotherdatayousaveduringthe
examarelinkedtothatpatient.(See“Patient
report”
onpage 52.)
To create a new patient information form
Note: Creatinganewpatientinformationform
removesanyunsavedpatientinformation,including