Sontex Supercal 531 - 3.8 Possible Parameterisations

Manual Integrator Supercal 531 06-06-2011 18
3.8 Possible parameterisations
The Supercal 531 is parameterised with the software Prog531 over the optical interface or the ex
factory M-Bus module. Each integrator is manufactured after order and parameterised in the fac-
tory in accordance with the customer’s specifications.
Adaptations and modifications of the factory parameterisation can be carried out by authorized
centres (e.g. external accredited laboratories) with the necessary equipment.
Paramet
e
ri
s
ations
Possibilities
Standard
Remarks
Units
energy display
kWh, MWh, GJ, BTU kWh or MWh internal calculations
are based on Joule
Units
volume display
m3, US-gallons, litre m
3
internal calculations
are based on m
3
Units
temperature display
°C, °F or
K (Delta T)
°C and K internal calculations
are based on °C
Place of installation return pipe, supply
pipe
return pipe
Pulse factor in l / pulse 0.0001 ... 99‘999‘999 to customer’s request
Pulse factor in pulse / l 0.0001 ... 99‘999‘999 to customer’s request
Flow m
3
/l or US-Gallon/min m
3
/l m
3
/l
Power KW or MW KW KW