Manual Integrator Supercal 531 06-06-2011 40
To address the average values 02 to 32:
Please press the enter key
The index „01“ for average value „01 avg“ flashes. Now you can proceed in two different ways:
Press the control key constantly.
Thus the indices of all further average values (02 to 32,
flashing) can be called. The previously selected value with
the current power, flow etc. is displayed as well.
Alternatively, the display sequence for the requested
average value can be selected by pressing the enter key.
The average values can then be called by repeatedly
pressing the control key.