20
6 As in steps 4 and 5, use the UP or DOWN button
or the PHASE knob to select “A”, and press the
ENTER button.
“CA” (white) “?” (yellow) is displayed.
CHANNEL NAME
PROG
EDIT
CAM
VTR
NEW NAME
CA?
p
7 As in steps 4 and 5, use the UP or DOWN button
or the PHASE knob to enter “M” and “2”.
“CAM2” (white) “?” (yellow) is displayed.
20 characters can be entered as a channel name.
CHANNEL NAME
PROG
EDIT
CAM
VTR
NEW NAME
CAM2?
p
Check the entered name, and if it is correct, go on
to step 8.
To correct the entered text
Example: change “CAM2” to “CAM-2”
7-1) Press the Del button of the numeric keypad to
delete “2”.
CHANNEL NAME
PROG
EDIT
CAM
VTR
NEW NAME
CAM?
p
7-2) Enter “-” and “2”.
CHANNEL NAME
PROG
EDIT
CAM
VTR
NEW NAME
CAM-2?
p
Check the modified text, and if it is correct, go on
to step 8.
8 Press the ENTER button.
The INPUT CONFIGURATION menu appears,
and the CHANNEL NAME is set to the name you
entered (up to six characters from the head of the
name are displayed).
10 CH
INPUT CONFIGURATION ↑
FILTEROFF
CHANNEL NAME... CAM2
CONTROLPRESET
COLOR TEMP... STD
HPHASE100
SAD H POSITION 0O0
COPY...
p
Basic Menu Operations
To Next Page
Loading...
