Sony BVM-14F5U - Preset Adjustment of Picture Level Knobs

21
Using default names
Example: copy “CAM” and change it to “CAM2”
1 Using the UP or DOWN button, move the cursor to
“CAM”.


   
   CHANNEL NAME   
PROG
EDIT
CAM
VTR

NEW NAME 


p
2 Press the ENTER button.
“CAM” (white) “?” (yellow) is displayed on the
bottom line of the screen.


   
   CHANNEL NAME   
PROG
EDIT
CAM
VTR

NEW NAME 
CAM? 

p
3 Using the UP or DOWN button or PHASE knob,
enter “2”.


   
   CHANNEL NAME   
PROG
EDIT
CAM
VTR

NEW NAME 
CAM2? 

p
4 Press the ENTER button.
The INPUT CONFIGURATION menu appears,
and the CHANNEL NAME is set to “CAM2”.


10 CH  
INPUT CONFIGURATION ↑
FILTEROFF
CHANNEL NAME...    CAM2
CONTROLPRESET
COLOR TEMP... STD
HPHASE100
SAD H POSITION     0O0

COPY...
p