53
Notes
•Before a monitor memory card can be used, it must be formatted it with the FORMAT menu
(805).
•System data and memory card data (800) cannot be stored on the same memory card. To store
memory card data, use another memory card.
•The BKM-12Y monitor memory card has a capacity of 256 Kbytes. It can store either system
data for up to 8 monitors or 38 files of memory card data.
771 BACK UP SYSTEM DATA: While the system is writing the data, a “–” mark blinks
at the top right of the menu. (It takes some time to save the data.)
BACK UP SYSTEM DATA
IN PROGRESS...SYSTEM
772 RE-STORE SYSTEM DATA: Confirm the data restore operation.
RE-STORE SYSTEM DATA
ALL DATA WILL BE
RESTORED
ARE YOU SURE?
OK: ENTER KEY
CANCEL: MENU KEY
To continue, press the ENTER button. ÷ Read the data from the monitor memory card. ÷
773
To cancel, press the MENU button. ÷ Return to the BACK UP SYSTEM DATA menu
(771).
773 RE-STORE SYSTEM DATA: While the system is reading the data, a “–” mark
blinks at the top right of the menu. (It takes some time to load the data.)
RE-STORE SYSTEM DATA
IN PROGRESS...SYSTEM
780 RE-START MONITOR: Turn the monitor off and on again automatically.
790 ADJ INT SIGNAL: Adjust the SETUP level and 100 IRE level of the internal white signal
which is used with the COLOR TEMP ADJ menu (200).
To Next Page
Loading...
