79-GB
Network Operation
4 Sending email
Tip
You can send email messages with your signature. For details, see “Attaching your
signature to messages” (p. 84).
(1) Select the still images and/or moving pictures to attach to the email message.
For details, see “Attaching still images and/or moving pictures to email”
(p. 82).
(2) Check the message.
For details, see “Checking or editing a message” (p. 80).
(3) Set a communication device to connection standby with your camcorder.
For details, refer to the operating instructions supplied with the
communication device.
(4) Tap [Send].
If you use a dial-up connection, dial the telephone number displayed on the
screen for verifying the connection. If you want to dial other telephone
numbers, tap [TEL No.] to display the list of registered telephone numbers.
Tap the desired telephone number to select it.
To connect to an outside line, for example in a hotel, check the item “Prefix
No.” and enter the prefix number.
When you use a LAN connection, the screen for verifying the connection may
not appear.
,
(5) Tap [Connect].
If you use a dial-up connection, your camcorder starts dialing the selected
telephone number. After sending email is complete, the message “Sending
Mail Complete” appears. If you use a dial-up connection, the telephone line is
automatically disconnected.
,
Using email
To Next Page
Loading...
