Sony DCR-TRV950 Network Function - Playback - Basics; Playing Back a Tape; To Stop Playback

39
Playback – Basics
You can monitor the playback picture on the screen. If you close the LCD panel, you
can monitor the playback picture in the viewfinder. You can control playback using the
Remote Commander supplied with your camcorder.
(1) Prepare the power supply and insert the recorded tape.
(2) Set the POWER switch to VCR while pressing the small green button.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME.
– : To turn down
+ : To turn up
When you close the LCD panel, sound is muted.
To stop playback
Press x.
— Playback – Basics —
Playing back a tape
45
6
2
1
3
VOLUME
REW PLAY
POWER
CAMERA
MEMORY/
NETWORK
VCR
OFF
(
CHG
)