Quick Start Guide
8
Inserting a cassette (p. 23)
Connecting the power cord (p. 19)
Use the battery pack when using your camcorder outdoors (p. 15).
1 Slide OPEN/Z
EJECT in the
direction of the
arrow to open the
lid.
2 Insert the cassette
straight as far as
possible into the
cassette compartment
with the window
facing out and the
write-protect tab
facing upward.
3 Close the cassette
compartment by
pressing
on the
cassette compartment.
After the cassette
compartment goes
down completely,
close the lid until it
clicks.
This chapter introduces you to the basic features to recorded
pictures on tapes of your camcorder. See the page in parentheses
“( )” for more information.
AC power adaptor (supplied)
Connect the plug with its v
mark facing up.
Open the DC
IN jack cover.
Write-protect tab
Quick Start Guide – Recording on a tape
To Next Page
Loading...
