Sony DNW-A25 - Page 107

Setup Menu 6-7
Chapter 6 Setup Menu
Turn the jog or shuttle dial depending
on the current search mode (indicated
by JOG/SHUTTLE indicators).
Turning the jog or shuttle dial in the
clockwise direction increments the
item number, and turning it in the
counterclockwise direction
decrements the item number.
If you turn the shuttle dial, the item
number changes at a rate depending
on the shuttle dial angle. If you turn
the jog dial, the item number changes
on the jog dial rotation speed.
By holding down the HOLD button
and rotating the dial, you can display
item numbers in the previous or next
series.
Changing a menu item
setting value
To change the setting value of the
currently displayed menu item use the
following procedure.
1
2
MENU SET
1 Holding down the search button,
turn the jog or shuttle dial.
The setting value changes at a rate
depending on the shuttle dial
angle or on the jog dial rotation
speed.
2 When the desired setting value is
displayed, press the SET button.
This saves the new setting value,
and the menu display disappears.
To abandon making a change
Press the MENU button before
pressing the SET button.
The menu display disappears from the
LCD monitor and sub LCD, without
the new setting value being saved.
Resetting the menu settings
to their factory default values
(menu item B20)
LCD monitor
SET button
PB MENU
PB/EE
SET
sub LCD