Extended Menu
6-24 Setup Menu
Chapter 6 Setup Menu
Item number Item name Settings
Menu items in the 600s, relating to the time code generator (continued)
614
FIRST EDIT TC In First Edit mode, select whether or not to set the
timecode value for the start when creating the base
tape for editing (see page 2-18). When this is set to
ON, set the start timecode value (see item 603
“Setting the ID code”).
OFF : Do not set.
ON: Set.
615 FIRST EDIT HEADER Set the number of seconds before the timecode
value set by item 614 at which the recording starts.
10 - 20 - 30 seconds: Set value in this range, in
increments of 1 second.
To Next Page
