35
Notes on use with the CCU-M7/M7P or
CCU-M5/M5P camera control unit
Switch setting
•Set the VTR SELECT switch on the camera adaptor
to "1."
•When the camera is connected to the CCU, the
following switches on the camera head do not
operate:
GAIN selector
WHITE BAL selector
H PHASE control
SC PHASE control
SC PHASE selector
SHUTTER switch
BARS switch
ABL switch
White/black balance adjustment
•When the W/B BALANCE selector on the CCU is
set to PRESET or MANUAL, the CCU adjusts the
white balance and takes priority over the setting done
on the camera.
•If the W/B BALANCE selector is set to AUTO, the
white balance can be adjusted using either the camera
or CCU controls.
•Do automatic black balance adjustments by setting
the W/B BALANCE selector on the CCU to AUTO
or PRESET, and the AUTO W/B BAL switch on the
camera to BLK.
To Next Page
