Sony EV-S7000 - Hookup 1: VCR setup; Hookup 1: VCR Plus+ channel setup

Hookup 1: VCR setup
1 Set the RF UNIT switch to CH 3 or CH 4, whichever
channel is not used in your area. If both are used, set
the switch to either channel.
If you made A/V connections (from page 11), you
can skip this step.
For details, see page 72.
2 Turon your cable box.
3 Set NORMAL/CATV to CATV:
Press MENU and select
Set NORMAL/CATV to
TUNER PRESET.
CATV and press EXECUTE.
MENU PAGE! TUNER PRESET CHS
DTIMER SET/CHECK
uP MENU PNORMAL/CATV NORMOCATV
T AUTO PRESET
SET VCR Pluss CHANNELS MANUAL SET @ADD ERASE
CABLE BOX CONTROL AF @ON OFF
CLOCK SET FINE TUNING
Use AY to cotect on Use a V to select an
trem, then push EXECUTE them, then push «>
For details, see page 24.
4 Set CABLE BOX CONTROL to ON:
Press MENU and select
CABLE BOX CONTROL.
Select ON and press
EXECUTE.
MENU PAGES CABLE BOX CONTROL
TIMER SET/CHECK
i? MENU
SET @ONn OFF
T VCR Pluss CHANNELS
PCABLE BOX CONTROL
CLOCK SET Use 4 > to select
Push EXECUTE for tiest
Use 4 V to seteoct en time setup
ttem, then push EXECUTE Push MENU to quit
Enter your cable code Select your cable box output
number and press EXECUTE. channel and press EXECUTE.
Your CABLE BOX Code No Your CABLE BOX Output CH
a0 cn2
Ocn3
cné
LINE(LINE IN 1 on VCR]
Enter your CABLE BOX
Code No.using 0-9 keys
Reteor to the Operating
Menval tor the Code Use a ¥ to select CABLE
Then push EXECUTE BOX CH Then push EXECUTE
For details, see page 27.
If your cable box is not compatible
Check with your cable company to see if they can
provide a compatible box. If not, use Hookup 2 (or 5, if
you have only a few scrambled channels) or Hookup 4
(if you have many scrambled channels).
ferearraaniinass Rots PRN, ART STESE PATE F852 -F
Hookup 1: VCR Plus+ channel setup
1 Find the VCR Plus+ Channel Listing in your program
guide. For details on the VCR Plus+ Channel Listing,
see page 30.
2 if thechannels in the program guide are different
from the channels that you actually use on your TV,
set the channels that are different as follows:
Press MENU and select
SET VCR Plus+ CHANNELS.
Enter the program guide
channel, then the channel
you use on your TV.
MENU PAGES
TIMER SET/CHECK
UP MENU
SET VCR Plus+ CHANNELS
GUIDE CH TV CH
28 - 7s
CABLE 80x CONTROL Push 0-9 keys 10 Set
CLOCK SET program GUIDE CH
Use 4 V to select an
Or push EXECUTE to see
item,thea push EXECUTE
VCR Plus+ CHANNEL LIST
Program guide channel
Your actual TV channel \
sf
For details, see page 31. Press EXECUTE.
You are now ready to use your VCR
A Quick reference to operations is provided on the
back cover to help you quickly enjoy the basic
functions. These procedures differ slightly depending
on the hookup used. Make a note of which hookup you
used (Hookup 1) so that you can always follow the
correct instructions.
Pa len a AE EE oN fas tert evel sas eae ee ETRE a