Sony EV-S800 - Page 41

EV-S800/-S850PS
REMOTE
Editing tapes from the 8 mm video camera/cassette
recorder having a 5-pin REMOTE connector to this unit
— Automatic insert editing —
Connection
Connect the CONTROL L connector of this unit to the
REMOTE connector of the video camera/cassette recorder.
For audio/video connection, see the illustration.
Before operating
On this unit
Set the switches as follows:
e MASTER/SLAVE on the rear panel to MASTER.
¢ COMMAND MODE in the upper compartment to VTR 2.
Press INPUT SELECT to display LINE in the window.
Operation
Set the Commander's
command mode selector Operation
to
1 VTR 1 1 Play back the tape and
decide the starting point of
the recording.
2 Set in the playback pause
mode.
Play back the tape and
decide the ending point of
the recording.
2 Press COUNTER RESET to
display “0000” in the
window.
3 Rewind the tape and decide
the starting point of the
recording.
4 Set to the recording pause
mode.
5 Press SYNCHRO EDIT.
Playback and recording start
simultaneously.
When the counter reaches
the “0000” point, editing
stops automatically and
each unit enters the
playback or recording pause
mode.
For accurate setting of the starting/ending point, use JOG/
SHUTTLE.
To stop the on-going editing operation, press SYNCHRO
EDIT or STOP with Commander’s command mode selector
set to VTR 2.