10
HCD-CPX11
Remote control
ALBUM +/– qa (9, 10, 15)
CD qh (8, 10)
CLEAR qd (10)
CLOCK/TIMER SELECT 2
(18, 19, 24)
CLOCK/TIMER SET 3 (7, 17,
18)
DISPLAY ql (13, 20)
ENTER 9 (7, 10, 11, 17, 18, 19)
EQ qs (16)
FM MODE 4 (12, 25)
FUNCTION 6 (8, 10, 12, 14, 16,
23, 26)
PLAY MODE qk (8, 10, 15, 25)
REPEAT 4 (9)
SLEEP w; (17)
TAPE qg (14)
TUNER/BAND 5 (11, 12)
TUNER MEMORY qj (11)
TUNING MODE qk (11, 12)
VOLUME +/– 0 (17)
?/1 (power) 1 (7, 12, 17, 18)
x (stop) 8 (9, 14)
X (pause) 8 (9, 14)
N (play) 8 (8, 10, 14, 18)
./> (skip back/skip
forward) qf (7, 9, 10, 16, 17,
18, 19)
m/M (rewind/fast forward)
7 (9, 14)
+/– (tuning) qf (11, 12)
ALPHABETICAL ORDER
A – O
P – Z
BUTTON DESCRIPTIONS
4
5
6
7
8
9
w; 1
qa
qd
qs
ql
qk
qj
qh
qg
qf
0
3
2
*
*Button does not function with this model.
Use buttons on the remote for the operation.
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET.
3 Press ./> repeatedly to set the
hour.
4 Press ENTER.
5 Press ./> repeatedly to set the
minute.
6 Press ENTER.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET.
2 Press ./> until “CLOCK SET”
appears, then press ENTER.
3 Do the same procedures as step 3 to 6
above.
Note
The clock is not displayed in Power Saving Mode.
Setting the clock
To Next Page
Loading...
