78
HCD-GN1300D
SECTION 7
EXPLODED VIEWS
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
Note:
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice.
Some delay should be anticipated when
ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
• Hardware (# mark) list and accessories are
given in the last of this parts list.
• Abbreviation
E4 : African model
E15 : Iran model
EA : Saudi Arabia model
MY : Malaysia model
PH : Philippines model
SP : Singapore model
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
7-1. MAIN SECTION
#2
10
1
2
#2
#3
#3
11
1
#1
4
3
12
9
6
#1
#1
front panel section
back panel section
not supplied
not supplied
not supplied
not supplied
not supplied
not supplied
6
6
5
not supplied
(KARAOKE SCORING
board)
8
7
2
6
6
14
16
13
15
17
18
1 3-363-099-02 SCREW (CASE 3 TP2)
2 3-363-099-32 SCREW (CASE 3 TP2)
3 4-126-672-01 HOLDER (TC)
4 4-126-671-01 CASE, TOP
5 4-126-663-71 PANEL, LOADING
6 3-087-053-01 +BVTP 2.6 (3CR)
7 3-274-427-01 BELT (SR)
8 3-274-426-01 BELT (FR)
9 1-417-790-11 DECK, MECH
10 4-126-682-01 PANEL, SIDE L(M)
11 4-126-663-81 PANEL, SIDE R(M)
12 4-126-693-01 SPRING (TC)
13 2-669-613-01 DETENT SPRING
14 4-224-104-11 DAMPER
15 4-231-824-01 CAM(A), HEART
16 4-231-836-01 SPRING (HEART CAM-A)
17 1-827-720-11 WIRE (FLAT TYPE) (11 CORE)
18 1-829-023-11 WIRE (FLAT TYPE) (23 CORE)
#1 7-685-646-71 SCREW +BVTP 3X8 TYPE 2 IT-3
#2 7-685-871-01 SCREW +BVTT 3X6 (S)
#3 7-685-647-71 SCREW +BVTP 3X10 TYPE2 IT-3
Ver. 1.3
Note: If wire (fl at type) is replaced, install it after bending
it in the same form as that before replacement.