To Next PageTo Next Page
Need help?Do you have a question about the Sony HCD-GN1300D and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| USB Playback | Yes |
| Bluetooth | No |
| Audio Channels | 2.0 |
| USB Port | Yes |
| Remote Control | Yes |
| Total Power Output (PMPO) | 1000W |
| Tuner | Yes |
| Functions | CD, Radio, USB |
| Supported Media | CD-R, CD-RW |
| Display | LCD |
Detailed technical specifications for the HCD-GN1300D unit, covering amplifier, DVD, tape, and USB sections.
Lists model names using similar mechanisms for DVD and Tape sections.
Precautions for handling the optical pick-up block and laser diode to prevent damage and ensure safety.
Guidelines for using unleaded solder and replacing chip components, with heat considerations.
Critical safety component warnings and identification marks for critical parts.
Provides a step-by-step flowchart for disassembling the set.
Details the disassembly of the top case assembly and tape mechanism deck.
Covers the removal of the loading panel, front panel, and various boards like MIC and USB DVD.
Details the disassembly of display, STR, CD SW boards, and the tuner pack.
Explains the disassembly of DC fan, power transformer, and main/front board sections.
Details the removal of the DMB18 board and connector board.
Covers the disassembly of driver, SW boards, and the optical pick-up.
Details the removal of sensor board and motor (TB) board.
Explains the disassembly procedure for the motor (LD) board.
Checks LEDs, keys, display segments, model, destination, and software version.
Checks operations of amplifier and tape sections, including volume and tape functions.
Clears all data, including preset data, to initial conditions, useful for customer returns.
Mode to switch VACS ON/OFF and display VACS level triggering information.
Toggles AM channel step and prevents auto power-off when TCM is not connected.
Performs non-stop aging for meter devices and checks meter error codes.
Moves optical pick-up for vibration durability and clears data, or locks the disc tray.
Allows changing the video output color system from PAL to NTSC or vice-versa.
Enters DVD service mode for diagnosis and adjustment using the remote commander and TV.
Standard procedures for executing mirror time adjustment and checking IOP value.
Checks the latest 10 emergency history entries and clears error codes.
Resets laser hour data for both CD and DVD data.
Displays firmware versions for main, sub, RISC, 8032, Audio DSP, and Servo DSP.
Displays MTK firmware version and enables audio output without connecting MTK.
Cleaning, demagnetizing, and using correct tools for mechanical adjustments.
Details torque meter modes, measurements, and readings for FWD, REV, and FF/REW.
Checks FM tune level by inputting specific signals and verifying the "TUNED" indicator.
Demagnetizing heads, using correct screwdrivers, and applying locking compound for adjustments.
Procedure for adjusting the record/playback head azimuth for optimal L-CH and R-CH output.
Lists test discs for DVD and CD, and details adjustments for playback.
Connects oscilloscope to DMB18 board for RFMON signal waveform check.
Illustrates the functional blocks and signal paths within the RF section of the unit.
Shows the signal flow and functional blocks within the video processing section.
Depicts the functional blocks and signal paths for the tape deck and tuner sections.
Outlines the main functional blocks and their interconnections throughout the system.
Illustrates the amplifier block structure, including power stages and protection circuits.
Shows the functional blocks related to the display, power supply, and control systems.
Part 1 of the DMB18 board schematic, showing IC4602 and IC3601 circuits.
Part 2 of the DMB18 board schematic, detailing IC110, IC107, IC105, and related components.
Part 3 of the DMB18 board schematic, covering IC102 (Digital Servo Processor) and IC104.
Part 4 of the DMB18 board schematic, illustrating IC101 (Flash ROM) and IC103 (EEPROM).
Part 5 of the DMB18 board schematic, showing IC201 (Motor Driver) circuits.
Details the schematic of the display board, including the fluorescent indicator tube and remote receiver.
Schematic for DVD MIC and MIC DVD VR boards, showing IC1000, IC1100, and IC1101.
Schematic of the front board, detailing the power amplifier IC1302 and related circuitry.
Schematic of the karaoke scoring board, detailing the amplifier and comparator ICs.
Part 1 of the main board schematic, focusing on IC101 (System Control) and related circuits.
Part 2 of the main board schematic, showing IC600 and IC601 (OP-AMPs) for tape mechanism control.
Part 3 of the main board schematic, detailing power supply circuits and control ICs like IC256.
Part 4 of the main board schematic, showing IC102 (Surround Volume Control) and IC252/IC253 (OP-AMPs).
Part 5 of the main board schematic, illustrating the system control IC100 and power supply transistors.
Schematic for STR and CD SW boards, detailing the LED switch controller IC901.
Schematic for SUBTRANS and TRANS boards, showing power supply regulators and relay controls.
Schematic of the surround board, detailing amplifier IC1500 and power output stages.
Schematic of the video board, detailing the video amplifier IC1700 and selector IC1701.
Schematic of the HP board, illustrating the headphone output circuit.
Schematics for driver, motor (LD/TB), sensor, and SW boards, showing ICs and connections.
Schematics for connector and USB DVD boards, showing USB interface and connector details.
Details the function of pins 1-20 for the main board IC100 (System Control).
Details the function of pins 21-53 for the main board IC100 (System Control).
Details the function of pins 54-77 for the main board IC100 (System Control).
Details the function of pins 78-100 for the main board IC100 (System Control).
Details pins 1-43 for IC102, covering RF, servo, and digital processing functions.
Details pins 44-62 for IC102, covering USB, HDMI, and video DAC functions.
Details pins 63-108 for IC102, including host address, DRAM, and I2C interfaces.
Details pins 109-148 for IC102, covering DRAM, thermal monitor, and serial interfaces.
Details pins 149-181 for IC102, including DRAM, HDMI TX, and video DAC functions.
Details pins 182-211 for IC102, covering video DAC, analog chroma, and MIC detection.
Details pins 212-256 for IC102, covering audio, RF, and laser offset cancellation functions.
Exploded view of the back panel section, illustrating parts like the DC fan and tuner.
Exploded view of the front panel section, showing knobs, buttons, and the display.
Exploded view of the chassis section, detailing the main mechanical components and boards.
Exploded view of the DVD mechanism (part 1), showing tray, sensors, and motors.
Exploded view of the DVD mechanism (part 2), illustrating gears, pulleys, and the optical pick-up.
Comprehensive parts list for the DMB18 board, detailing resistors, capacitors, connectors, diodes, ICs, etc.
Parts list for DMB18 and Driver boards, including resistors, diodes, ICs, transistors, and coils.
Continues the parts list for the DMB18 board, covering ICs, transistors, and resistors.
Parts list for DMB18 and Driver boards, including transistors, resistors, and capacitors.
Parts list for the Main board, detailing transistors, resistors, ICs, and connectors.
Parts list for the Karaoke Scoring board, including ICs, resistors, and capacitors.
Continues the parts list for the Karaoke Scoring board, detailing resistors and capacitors.
Comprehensive list of capacitors with part numbers, descriptions, and specifications.
Parts list including diodes, ICs, connectors, jumper resistors for various boards.
Parts list detailing transistors and resistors used across various boards.
Detailed list of resistors used on the Main board, with part numbers and values.
Continues the list of resistors for the Main board, including various values and types.
Parts list for the MIC DVD board, detailing resistors and capacitors.
Parts list for multiple boards including MIC DVD, Motor, Sensor, and SW boards.
Parts list for STR and SUBTRANS boards, including switches, capacitors, connectors, diodes, transistors, resistors, and relays.
Parts list for the SURROUND board, indicating IC1500, IC1502, and output terminals.
Parts list for SURROUND and TRANS boards, including resistors, fuses, and holders.
Parts list for USB DVD and VIDEO boards, including capacitors, connectors, diodes, ICs, jacks, and resistors.
Miscellaneous parts list entries, including deck mechanism, wires, and notes on wire replacement.
