Sony HCD-SX7 - Panel (Back) Block, Fan Motor (M1)

HCD-SX7/SX7B
27
2-21. PANEL (BACK) BLOCK, FAN MOTOR (M1)
1 two screws (BV3)
(L=6 mm)
1 screw (BV3)
(L=6 mm)
5 panel (back) block
6 FAN motor (M1)
2 Remove the panel (back) block
in the direction of the arrow.
3 Draw the power cord
out of the groove.
– Rear view –
Front side
FAN motor cable
is straight.
FAN motor cable
is loose.
4 screw (BV/ring)
(L=8 mm)
4 screw (BV/ring)
(L=8 mm)
:LUHVHWWLQJ
OK
NG
SYSSET
2020/02/2722:53:44(GMT+09:00)