Sony HDC-P1 - Preset Operator File Management

4-3 (E)
HDC-P1
4-3. Preset Operator File
Preset operator fi le stores data in the camera. Data is called and stored using the setup menu. Items to be
stored as preset operator fi le are the same as operator fi le.
Calling (Refer to step 3 of Fig. 4-2.)
Using OPERATION Menu of This Unit
[OPERATION] → [OPERATOR|FILE] → [PRESET]
Storing (Refer to step 4 of Fig. 4-2.)
Using FILE Menu of This Unit
Use this menu when you want to store the current settings in the preset operator fi le as the standard set-
tings of operator fi le.
[FILE] → [OPERATOR|FILE] → [STORE|PRESET|FILE]
Initializing (Refer to step 5 of Fig. 4-2.)
Using FILE Menu of This Unit
Use this menu when you want to initialize the modifi ed preset operator fi le data to the factory-set values.
[FILE] → [FILE|CLEAR] → [PRESET|OPERATOR]