133
LOG
COPY LOG TO USB FLASH MEMORY
Acquires the following log information and then stores it in the USB drive installed in the unit.
• Detection of out-of-synchronization and clock unlocking of each device
• Internal video signal error detection and signal detection
• DRAM reset
• Abnormal temperature detection
• Format change
• S700P connection status change
• Connection status change of lens serial communication
• Startup information
Tip
Acquired log information is stored in the following directory of the USB drive.
\MSSONY\PRO\CAMERA\HDCP50
CLEAR LOG
Deletes the log data stored in the unit.
<LOG> S17 TOP
COPY LOG TO USB FLASH MEMORY: EXEC
CLEAR LOG: EXEC
To Next Page
