Sony HDC3500 - Page 32

32
5 Move the arrow marker (,) to “INSERT” and push on
the MENU SEL knob/ENTER button.
The page with the last item added appears.
6 Add the items.
1 Turn the MENU SEL knob/ENTER button until the
page that has the desired items appears then push
on the MENU SEL knob/ENTER button.
2 Turn the MENU SEL knob/ENTER button to move the
arrow marker (,) to the desired item then push on
the MENU SEL knob/ENTER button.
The USER 2 EDIT page appears again, displaying the
newly added item.
7 Add the remaining items by repeating steps 4 to 6.
You can add up to 10 items on one page.
To delete items from a page
Proceed as follows:
1 Move the arrow marker (,) to the item to be
deleted, and push on the MENU SEL knob/ENTER
button.
The EDIT FUNCTION screen appears.
2 Select “DELETE,” and push on the MENU SEL knob/
ENTER button.
The previously displayed page appears again, and the
message “DELETE OK? YES
,NO” appears at the upper
right.
3 To delete, turn the MENU SEL knob/ENTER button to
move the arrow marker (
,) to “YES,” and push on
the MENU SEL knob/ENTER button.
To change the order of items on a page
Proceed as follows:
1 Turn the MENU SEL knob/ENTER button to move the
arrow marker (
,) to the item to be moved then push
on the MENU SEL knob/ENTER button.
The EDIT FUNCTION screen appears.
2 Select MOVE then push on the MENU SEL knob/
ENTER button.
The previously displayed page appears again.
3 Turn the MENU SEL knob/ENTER button to move the
arrow marker (
,) to the position where you wish to
move the item then push on the MENU SEL knob/
ENTER button.
The item selected in step 1 moves to the position that
you selected in step 3.
In the above example, “ASSIGNABLE” is moved to the
top and the other items are moved down one line.
To insert a blank line
Proceed as follows:
1 Turn the MENU SEL knob/ENTER button to move the
arrow marker (
,) to the item above which you wish
to insert a blank line.
The EDIT FUNCTION screen appears.
2 Select “BLANK” then push on the MENU SEL knob/
ENTER button.
The previously displayed page appears again, and a
blank line is inserted above the specified item.
Note
You cannot insert a blank line on a page where 10 items
have already been registered.
Editing by pages
You can add a page to the USER menu, delete a page from
the USER menu, or replace pages, using the EDIT PAGE of
the USER MENU CUSTOMIZE menu.
To add a page
Proceed as follows:
1 Select “USER MENU CUSTOMIZE” on the TOP MENU
screen.
If this is the first time the USER MENU CUSTOMIZE menu
has been displayed, the CONTENTS page of the menu
appears. If the menu has been used before, the last
accessed page appears.
2 If the CONTENTS page is displayed, turn the MENU
SEL knob/ENTER button to move the arrow marker
(
,) to “EDIT PAGE” then push on the MENU SEL
knob/ENTER button to display the EDIT PAGE screen.
If a different page is displayed, turn the MENU SEL
knob/ENTER button until the EDIT PAGE screen
appears, then push on the MENU SEL knob/ENTER
button to select the page.
EDIT FUNCTION
c
INSERT
MOVE
DELETE
BLANK
ESC
<SW STATUS> P01
FLARE :
c
ON
GAMMA : ON
BLK GAM : OFF
KNEE : ON
WHT CLIP: ON
DETAIL : ON
LVL DEP : ON
SKIN DTL: OFF
MATRIX : OFF
ESC
ITEM MOVE
xx
c
VF OUT : COLOR
VF DETAIL : OFF
MARKER : ON
CURSOR : OFF
ZEBRA SW : OFF
: 1
z
ASSIGNABLE : OFF
ESC
EDIT PAGE E01
xx
01.<VF OUT>
c
02.<VF DETAIL>
03.<FOCUS ASSIST>
04.<VF DISPLAY>
05.<'!' IND>
06.<VF MARKER>
07.<CURSOR>
08.<ZEBRA>
09.<SWITCH ASSIGN1>
10.<SWITCH ASSIGN2>
TOP