95
Error Messages
If a problem occurs during operation, a warning message is
displayed.
Note
To display a message, set the DISPLAY switch to DISPLAY or
MENU.
Message Meaning
TEMP WARNING The internal temperature is
abnormally high.
FAN STOP The built-in fan is not rotating
properly.
SET CORRECT SYSTEM DATE The time/date of the internal
clock have not been set.
OHB BLOCK NG! A problem is detected in the
optical block.
NO USB FLASH DRIVE A USB drive operation was
attempted with no USB drive
connected.
USB FLASH DRIVE ERROR An error occurred during access
to a USB drive.
FORMAT ERROR! A USB drive operation was
attempted with an
unformatted USB drive.
WRITE PROTECTED File writing was attempted with
a write-protected USB drive.
FILE ERROR An error occurred while reading
a file from a USB drive.
OTHER MODEL’S FILE You attempted to read a file of
other models having no
compatibility.
FILE NOT FOUND The file you attempted to read
does not exist in the USB drive.
To Next Page
Loading...
