EasyManua.ls Logo

Sony HDC3500 - Page 56

Sony HDC3500
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
<HD DETAIL>
P11
DETAIL ON
, OFF
LEVEL –99 to +99, 0
Absolute value is displayed in ABS mode.
LIMITER [M] –99 to +99, 0
LIMITER [WHT] 99 to +99, 0 Absolute value is displayed in ABS mode.
LIMITER [BLK] –99 to +99, 0
Absolute value is displayed in ABS mode.
CRISP –99 to +99, 0
Absolute value is displayed in ABS mode.
LEVEL DEPEND –99 to +99, 0
Absolute value is displayed in ABS mode.
ON
, OFF
H/V RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
FREQ –99 to +99, 0
Absolute value is displayed in ABS mode.
MIX RATIO 99 to +99, 0
Absolute value is displayed in ABS mode.
KNEE APT –99 to +99, 0
Absolute value is displayed in ABS mode.
ON, OFF
ABS Highlighted: ABS (Absolute) mode
<4K DETAIL>
P12
DETAIL ON
, OFF
LEVEL –99 to +99, 0
Absolute value is displayed in ABS mode.
LIMITER [M] –99 to +99, 0
LIMITER [WHT] 99 to +99, 0 Absolute value is displayed in ABS mode.
LIMITER [BLK] –99 to +99, 0
Absolute value is displayed in ABS mode.
CRISP –99 to +99, 0
Absolute value is displayed in ABS mode.
LEVEL DEPEND –99 to +99, 0
Absolute value is displayed in ABS mode.
ON
, OFF
H/V RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
FREQ –99 to +99, 0
Absolute value is displayed in ABS mode.
MIX RATIO 99 to +99, 0
Absolute value is displayed in ABS mode.
KNEE APT –99 to +99, 0
Absolute value is displayed in ABS mode.
ON, OFF
ABS Highlighted: ABS (Absolute) mode
<SKIN DETAIL>
P13
SKIN DTL ON, OFF
SKIN GATE OFF, 1, 2, 3, (MAT) 1, 2, 3: The skin gate function can be turned on for
the specified channel only.
(MAT): Displayed when GATE of <MULTI MATRIX> is
ON.
NATURAL SKINDTL OFF
, ON
ZOOM LINK OFF
, ON
TELE 0 to 99
WIDE 0 to 99
CH SW 1: (ON), 2/3: ON, OFF
Sets the skin tone detail function independently for
each channel. (Channel 1 is always set to ON.)
Absolute values are indicated for LEVEL only in ABS
mode.
HUE 1/2/3: Execute using ENTER.
PHASE 1/2/3: 0
to 359
WIDTH 1/2/3: 0 to 90, 29
SAT 1/2/3: –99 to +99, –89
LEVEL 1/2/3: –99 to +99, 0
Y LIMIT 1/2/3: 0 to 99
ABS Highlighted: ABS (Absolute) mode
PAINT
Page name
Page No.
Item Settings Description

Related product manuals