4.10 Aging Mode
1) Press “” button to turn on “General Settings”
2) Press “↓” button to select “Aging Mode”
Remark#1
Toggle ”→” to select “ON” or Toggle “←” to select “OFF”
Exit Service Mode by pressing “Return” on Remote Commander.
Remark#2
Ensure that there is no Cable (RF, HDMI, etc.) connected to the TV
Test Reset
Pres
s
<Pow
er> tact key
on TV with keep pressing <Up> key on RC -> Then, displays “RESET” on Screen.
Remark#3
Perform Test Reset on TV after turning “OFF” Aging Mode
129
SYSSET
2018/05/0404:12:02(GMT+09:00)
To Next Page
Loading...
Need help?
General