4.15 Option Bit
1) Go to “Option bit” and Press “Enter” or “”
button
2) Select the option available “Shipping region” or “Tuner ID” by pressing “↑” or “↓”. Then press “>” or “ Enter”.
Option Purpose
Shipping
region
To select the Shipping region of the Set.
Please don’t change this setting unless for
service board replacement .
Tuner ID
To select the Tuner type of the Set. Please
don’t change this setting unless for service
board replacement .
135
SYSSET
2018/05/0404:12:02(GMT+09:00)