Sony KLV-19T400A - 2: Connecting an Antenna;Cable;Vcr; 3: Preventing the TV from Toppling over

7
GB
Start-up Guide
KLV-32/26/19T400A/26/19T400G/19T400W
4-000-037-11(1)
2: Connecting an
antenna/cable/VCR
Connecting an antenna/cable
3: Preventing the TV
from toppling over
1 Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2 Install a machine screw (M6 x 12, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine screw
with a strong cord.
8
8
8
8
Connecting an antenna/cable and VCR
Antenna cable
(not supplied)
Antenna cable
(not supplied)
Antenna cable
(not supplied)
Audio/Video
cable (not
supplied)
VCR
TV, CATV,
Satellite
or
If cannot
receive FM
signal
FM
signal
Antenna
selector
TV signal
010COV.book Page 7 Thursday, June 19, 2008 11:21 AM