9
GB
Start-up Guide
KLV-32/26/19T400A/26/19T400G/19T400W
4-110-401-11(1)
3
Press
F
/
f
to select the language displayed
on the menu screens, then press .
4 Press F/f to select the country/region,
then press .
5 Press F/f to select “Home”, then press .
6 Press G/g to select “OK”, then press .
The TV starts searching for all available channels.
This may take some time, please be patient and do
not press any buttons on the TV or remote.
If a message appears for you to confirm the
antenna connection
No programmes found. Please connect antenna
(aerial) and select “Confirm” to start auto-tuning
again. If 200 channels are found, auto-tuning is
stopped.
7 When the “Programme Sorting” menu
appears on the screen, follow the steps of
“Programme Sorting” (page 31).
If you do not want to change the order in which the
channels are stored on the TV, go to step 8.
8 Press MENU to exit.
The TV has now tuned in all the available
channels.
9 Press G/g to select the desired setting in
“Display this menu next time?” dialogue,
then press
to exit.
z • If “Yes” is selected and the TV is turned off by
pressing 1 on the TV, or is disconnected from
the AC power outlet, the initial set-up
procedure restarts the next time the TV is
turned on.
Auto-tuning the TV
English
Select country
010COV.book Page 9 Thursday, June 19, 2008 9:17 AM
To Next Page
Loading...
