14
GB
Tuning in a radio
station
1
Press FUNCTION to select “DAB,”
“TUNER FM” or “TUNER AM.”
2
Press and hold / until the
frequency indication in the
display window starts changing,
then release the button.
Tuning stops automatically when a
radio station is tuned in (Automatic
Scanning), and “STEREO” (when a FM
stereo broadcast is received) appears in
the display.
Manual tuning
Press / repeatedly to tune-in the
desired station.
Note on DAB/DAB+ stations
When you tune in a station that provides
RDS services, information such as the
service name or station name is provided
by broadcasts.
When tuning in a DAB/DAB+ station, it
may take a few seconds before you hear
any sound.
Primary service is automatically received
when secondary service ends.
This tuner does not support data services.
If reception of an FM stereo broadcast is noisy,
press MENU and select “Tuner Menu,” “FM
Mode” and “Mono” in turn, to select monaural
reception. This reduces noise.
To change the AM tuning interval
The default setting for AM tuning interval is
9 kHz (or 10 kHz for some areas). Use the
buttons on the unit to perform this
operation.
1
Press FUNCTION on the unit repeatedly to
select "TUNER AM."
2
Press / to turn off the unit.
3
Press and hold MENU and press / on
the unit.
“Step 9k” or “Step 10k” appears in the display.
When you change the interval, all the AM
preset stations are erased.
Listening to the radio
To Next Page
Loading...
Need help?
General
