Sony MAP-S1 Operating Instructions

30
GB
Setting the
Automatic Standby
function
The system enters Standby mode
automatically in about 15 minutes when
there is no operation or audio signal output
(Automatic Standby function).
By default, the Automatic Standby function
is turned on.
1
Press MENU.
2
Press / to select “Standby
Mode Menu,” then press ENTER.
3
Press / to select “Auto
Standby,” then press ENTER.
4
Press / to select “On” or “Off,”
then press ENTER.
Tip
 2 minutes before entering Standby mode, “Auto
Standby” displays in the display window.
Note
 The Automatic Standby function is invalid for the
tuner function (FM/AM/DAB), even when you
have enabled it.
 The system may not enter Standby mode
automatically in the following cases:
 while using the FM, AM or DAB function.
 while an audio signal is being detected
 during playback of audio tracks or files
 while the Play Timer or Sleep Timer is being
used
 The system counts down the time (about
15 minutes) again until it enters Standby mode,
even when Automatic Standby function is
enabled in the following cases:
 when a USB device is connected in USB
function
 when a button on the remote or unit is
pressed
Additional information

Sony MAP-S1 Specifications

General

Receiver type	stereo
Audio output channels	2.0 channels
Power output per channel (20-20KHz@8 Ohm)	100 W
HDMI in	0
Audio (L/R) in	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Binding post
Ethernet LAN	Yes
Supported radio bands	AM, FM
Optical drive type	CD player
Card reader integrated	No
Display	-
Product color	Silver
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.4 W
Power consumption (typical)	55 W