Sony MAP-S1 Operating Instructions

19
GB
Listening to music with connected components
Playing back the
music of connected
components
You can listen to a track of connected
components through external output
connected to the unit.
Note
 Beforehand, press the VOLUME – to turn down
the volume.
1
Press FUNCTION to select “LINE
IN.”
2
Connect its audio connecting
cord to the LINE IN (external
input) jack on the rear of the unit
and the output terminal of the
optional external equipment.
3
Start playback of the connected
component.
Adjust the volume on the connected
component during playback.
4
Press VOLUME +/– on the remote
to adjust the volume.
Note
 The system may enter Standby mode
automatically if the volume level of the
connected component is too low. For details, see
“Setting the Automatic Standby function”
(page 30).
Listening to music with connected
components

Sony MAP-S1 Specifications

General

Receiver type	stereo
Audio output channels	2.0 channels
Power output per channel (20-20KHz@8 Ohm)	100 W
HDMI in	0
Audio (L/R) in	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Binding post
Ethernet LAN	Yes
Supported radio bands	AM, FM
Optical drive type	CD player
Card reader integrated	No
Display	-
Product color	Silver
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.4 W
Power consumption (typical)	55 W