Sony MAP-S1 Operating Instructions

23
GB
Listening to music through a BLUETOOTH connection
Playing with high
quality sound codec
(AAC/aptX)
You can receive the data in AAC or aptX
codec format from a BLUETOOTH device. It
provides the playback with a higher quality
sound.
The factory settings of “Bluetooth AAC” and
“Bluetooth aptX” are “On.”
1
Press MENU.
2
Press / to select “Bluetooth
Menu,” then press ENTER.
3
Press / to select “Bluetooth
AAC” (AAC codec) or “Bluetooth
aptX” (aptX codec), then press
ENTER.
4
Press / to select “On,” then
press ENTER.
Note
 If you initiate setup during BLUETOOTH
connection, the connection is cut.
 If sound is interrupted during reception in AAC
codec format, set to “Off” in step 4 to cancel the
settings. In this case, the system receives SBC
codec.

Sony MAP-S1 Specifications

General

Receiver type	stereo
Audio output channels	2.0 channels
Power output per channel (20-20KHz@8 Ohm)	100 W
HDMI in	0
Audio (L/R) in	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Binding post
Ethernet LAN	Yes
Supported radio bands	AM, FM
Optical drive type	CD player
Card reader integrated	No
Display	-
Product color	Silver
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.4 W
Power consumption (typical)	55 W