15
GB
Listening to the radio
Presetting radio
stations
You can preset your desired radio stations.
1
Tune in the desired station, then
press MENU.
2
Press / to select “Tuner Menu,”
then press ENTER.
To preset an AM station, select “AM
Preset Memory” and follow step 4.
3
Press / to select “FM Preset
Memory” (for FM stations) or
“DAB Preset Memory” (for DAB
stations), then press ENTER.
4
Press / to select “Ok,” then
press ENTER.
5
Press / to select preset
number, then press ENTER.
“Complete!” appears in the display
window and the radio station is
registered with the preset number.
Repeat the steps above to register
further radio stations.
6
Press / to turn off the power,
then press / again to turn on
the power.
You can preset up to 20 FM, 20 DAB/DAB+, and
10 AM stations.
If you select an already-registered preset
number in step 5, the preset radio station is
replaced by the currently tuned-in radio station.
To tune in to a preset radio
station
Press / to select the preset number
to which the desired station is registered.
Before you can tune in DAB/DAB+ stations,
you must perform a DAB Initial Scan.
When you have moved to another area, also
perform the DAB Initial Scan manually to
update the DAB/DAB+ service information.
1
Press MENU.
2
Press / to select “Tuner Menu,”
then press ENTER.
3
Press / to select “Initial Scan,”
then press ENTER.
4
Press / to select “Ok,” then
press ENTER.
Scanning begins. The scanning
progress is indicated by asterisks
(*******). Depending on the DAB/DAB+
services available in your area,
scanning may take a few minutes.
If your country or region does not support DAB/
DAB+ broadcast, “No Service” appears.
This procedure clears all previously stored
presets.
Before unplugging the DAB/FM lead antenna,
make sure the system is turned off to preserve
your own DAB/DAB+ settings.
Running the DAB
Automatic Scan manually
To Next Page
Loading...
Need help?
General
