Sony MAP-S1 Operating Instructions

7
GB
Getting started
Location and Function of Controls
Note
This manual mainly explains operations using the remote, but the same operations can also
be performed using the buttons on the unit having the same or similar names.
Unit (front)
/ (power) button
Use to turn the power on or off.
 Standby indicator
Lights in yellow-green when the power is
turned on. Lights in red when the power
is turned off. The indicator flashes in red
if the system detects an abnormality
(page 36).
When the system in BLUETOOTH/
Network Standby mode, the indicator
lights up in orange.
 Display window
 N-Mark
Place a smartphone/tablet equipped
with the NFC function close to this mark
to perform BLUETOOTH registration,
connection or disconnection by a one-
touch action (page 22).
 BACK button
Use to go back to the previous display.
 MENU button
Use to display the menu. Press / to
select the items in the menu.
/ (previous/next) /TUNING +/–
buttons
 Use to cue to the beginning of a track
or file.
 Use to tune in a desired radio station.
PUSH ENTER button
Use to operate as the ENTER button.
 (play/pause) button
Use to start or pause playback.
 Remote sensor
 VOL dial
Use to adjust the volume.
 (eject) button
Use to eject a CD.
 Disk slot
Insert a CD with the label side facing
upward.
Getting started

Sony MAP-S1 Specifications

General

Receiver type	stereo
Audio output channels	2.0 channels
Power output per channel (20-20KHz@8 Ohm)	100 W
HDMI in	0
Audio (L/R) in	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Binding post
Ethernet LAN	Yes
Supported radio bands	AM, FM
Optical drive type	CD player
Card reader integrated	No
Display	-
Product color	Silver
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.4 W
Power consumption (typical)	55 W