Sony MAP-S1 Operating Instructions

48
GB
Wireless LAN:
Compatible standards:
IEEE 802.11 b/g (WEP 64 bit, WEP 128 bit)
Frequency band 2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Available channels ch1 to ch13
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Compatible formats:
PCM 192 kHz/24 bit, DSD 2.8 MHz/1 bit
DSD (DSF, DSDIFF), LPCM (WAV, AIFF), FLAC,
ALAC, MP3, AAC, WMA
General
Power requirements:
AC 220 V - 240 V, 50 Hz/60 Hz
Power consumption:
55 watts
Dimensions (W/H/D) (incl. projecting parts):
Approx. 251 mm x 115 mm x 290 mm
Mass:
Approx. 5.6 kg
Supplied accessories:
Remote (RM-AMU209) (1), R03 (Size AAA)
batteries (2), AC power cord (1), DAB/FM
lead antenna (2), AM loop antenna (1), Quick
Setup Guide (1), Operating Instructions (this
manual) (1)
Design and specifications are subject to
change without notice.
Standby power consumption: 0.5 W (all wireless
network ports off)
Networked Standby mode: 16 W (all wireless
network ports on)

Sony MAP-S1 Specifications

General

Receiver type	stereo
Audio output channels	2.0 channels
Power output per channel (20-20KHz@8 Ohm)	100 W
HDMI in	0
Audio (L/R) in	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Binding post
Ethernet LAN	Yes
Supported radio bands	AM, FM
Optical drive type	CD player
Card reader integrated	No
Display	-
Product color	Silver
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.4 W
Power consumption (typical)	55 W