Sony PMW-RX50 - Page 29

Useful Functions
29
Recording
Notes
Proper operation may not be possible if the USB
flash drive is connected without selecting [USB
A].
1 Connect a USB flash drive formatted in
the FAT32 file system to the external
device connector.
A file list appears.
Note
The file list displays up to 64 files.
Even if the total number of planning metadata files
is 64 or less, all of the planning metadata files may
not appear if the directory where they are located on
the USB flash drive (General/Sony/Planning)
contains 512 or more files.
2 Select the file which you want to load in
the file list, then press the SEL/SET
button.
Confirming the detailed information in planning
metadata
After loading a planning metadata file into
memory of the recorder, you can check the details
of the file, such as the filename, time and date of
file creation, and the titles specified in the file.
Select [Properties] in [Plan.Metadata] (page 60)
in the [OTHERS] menu, then select [Execute].
Using the Wi-Fi connection
When connecting the unit with a computer via
Wi-Fi, the file transmission can be done accessing
the unit’s Web menu from a computer.
1 Launch the browser and input http://
<recorder’s IP address> (page 61) in the
address bar.
2 Input the user name and password, then
click [OK].
User name: admin
Password: pmw-rx50
Clearing the loaded planning metadata
To clear the planning data loaded in the recorder’s
memory, proceed as follows:
Select [Clear] > [Execute] in [Plan.Metadata]
(page 60) in the [OTHERS] menu.
Defining a clip name in Planning
Metadata
The following two types of clip name strings can
be written in a planning metadata file.
• ASCII-format name, which is displayed on the
LCD monitor
• UTF-8-format name, which is actually
registered as the clip name
You can select the type for displaying the clip
name with [Clip Name Disp] in [Plan.Metadata]
(page 60) in the [OTHERS] menu.
When you specify a clip name in planning
metadata, the name is displayed under the
operation status indication on the LCD monitor.
Example of clip name strings
Use a text editor to modify the description for the
<Title> tag.
The shaded fields in the example are clip name
strings. “Typhoon” is described in ASCII format
(up to 44 characters).
“Typhoon_Strikes_Tokyo” is described in UTF-8
format (up to 44 bytes).
Here, “sp” indicates a space, and 3 indicates a
carriage return.
<?xml
sp
version="1.0"
sp
encoding="
UTF-8"?>3
<PlanningMetadata
sp
xmlns="http://
xmlns.sony.net/pro/metadata/
planningmetadata"
sp
assignId="
P0001"
sp
creationDate="
2011-08-20T17:00:00+09:00"
sp
lastUpdate="
2011-09-28T10:30:00+09:00"
sp
version="1.00">3
<Properties
sp
propertyId="
assignment"
sp
update="
2011-09-28T10:30:00+09:00"
sp
modifiedBy="Chris">3
<Title
sp
usAscii=" "
sp
xml:lang="en">
</Title>3
</Properties>3
</PlanningMetadata>3
Notes
• When you create a file, enter each statement as a single
line by breaking a line with a CRLF only after the last
character of the line, and do not enter spaces except
where specified with “sp.”
Typhoo
n
Typhoon_Strikes_Tokyo