13
STR-DA5300ES
You can use the supplied remote RM-AAL008 to operate
the receiver and to control the Sony audio/video
components that the remote is assigned to operate.
RM-AAL008
Remote commander
Name Function
A AV ?/1 (on/
standby)
Press to turn on or off the audio/video
components that the remote is assigned to
operate. If you press the ?/1 (B) at the
same time, it will turn off the receiver
and other Sony components (SYSTEM
STANDBY).
Note
The function of the AV?/1 switch
changes automatically each time you press
the input button (C).
B ?/1 (on/
standby)
Press to turn the receiver on or off.
If ZONE 2 or ZONE 3 is selected, only
the main receiver is turned on or off with
this button. To turn off all components
including an amplifier in zone 2 or zone 3,
press ?/1 and AV?/1 (A) at the same
time (SYSTEM STANDBY).
C Input
buttons
Press one of the buttons to select the
component you want to use. Press a
pink-labeled button after pressing SHIFT
(wj). When you press any of the input
buttons, the receiver turns on.
The buttons are factory assigned to
control Sony components. You can
program the remote to control non-
Sony components following the steps in
“Programming the remote”.
D ZONE 2
ZONE 3
Press to enable the zone 2 or zone 3
operation.
E AMP Press to enable the receiver operation.
F MUSIC Press to select sound field.
G MOVIE Press to select sound field.
Name Function
Name Function
H Numeric
buttons
Press to
− preset/tune to preset stations.
− select track numbers of the CD player,
DVD player, Blu-ray Disc Player or
MD deck. Press 0/10 to select track
number 10.
− select channel numbers of the VCR or
satellite tuner.
− After pressing TV (wk), press the
numeric buttons to select the TV
channels.
I ENTER Press to enter the value after selecting a
channel, disc or track using the numeric
buttons.
MEMORY Press to store a station during tuner
operation.
J AMP MENU Press to display the menu to operate the
receiver.
K
V/v/B/b
Press V/v/B/b to select the menu items.
Then press
L OPTIONS Press to display and select items from
option menus for receiver and DVD
player, Blu-ray Disc Player.
TOOLS Press to display and select items from the
option menus for DVD player or Blu-ray
Disc Player, etc.
M MENU Press to display the menu to operate the
audio/video components.
SCREEN/
DSPL
CONTROL
Press SHIFT (wj), then press MENU to
switch the display mode of the menu
between SCREEN (to display the menu on
the TV screen) and DSPL (to display the
menu in the display window).
N CATEGORY
+/–
Press to select the category for satellite
tuner.
O m/M
a)
x
a)
X
a)
H
a) b)
./>
a)
Press to operate the DVD player, Blu-ray
Disc Player, CD player, MD deck, tape
deck, or component connected to the
DIGITAL MEDIA PORT adapter etc.
CATEGORY
MODE
Press to select the category mode for
satellite tuner.
TUNING +/– Press to select station.
P PRESET
+
b)
/–
Press to register FM/AM/satellite tuner
stations or to select preset stations.
TV CH +/– Press TV (wk), then press TV CH+/− to
operate the TV, satellite tuner, VCR, etc.
to enter the selection.
Q F1/F2 Press TV (wk), then press F1 or F2 to
select a component to operate.
• HDD recorder
F1: HDD
F2: DVD player, Blu-ray Disc Player
• DVD/VHS combo player
F1: DVD player, Blu-ray Disc Player
F2: VHS
MACRO1,
MACRO2
Press AMP (5), then press MACRO 1 or
MACRO 2 to set up the macro function.
TV/INPUT Press TV/INPUT and TV (wk) at the
same time to select the input signal
(TV input or video input).
WIDE Press repeatedly to select the wide picture
mode.
PIP Press SHIFT (wj), then press PIP to
switch the image of the PIP (Picture in
Picture) window. The image will be
changed as follows. EXT VIDEO t
ZONE 2 VIDEO t OFF. You can swap
the position of the main screen and the
PIP window (swap) by pressing the
(qa). You can also move the window
position using V/v/B/b (qa).
Note
The HDMI video signals are not output
while the PIP window is displayed.
RESOLUTION
Press SHIFT (wj), then press
RESOLUTION repeatedly to change the
resolution of signals output from the
HDMI OUT or COMPONENT VIDEO
MONITOR OUT jack.
R DVD/
TOP MENU,
MENU
Press to display the menus of the DVD
player on the TV screen. Then use
V/v/B/b and
to perform a menu
operations.
NIGHT
MODE
Press AMP (5), then press NIGHT
MODE to activate the NIGHT MODE
function.
INPUT
MODE
Press AMP (5), then press INPUT
MODE to select the input mode when the
same components are connected to both
digital and analog jacks.
SLEEP Press SHIFT (wj), then press SLEEP to
activate the sleep timer function and the
duration which the receiver turns off
automatically.
TEST TONE Press SHIFT (wj), then press TEST
TONE to output the test tone from each
speaker.
S MUTING Press to turn off the sound temporarily.
Press the button again to restore the sound.
T MASTER
VOL +/–
Press to adjust the volume level of all
speakers at the same time.
TV VOL +/– Press TV (wk), then press TV VOL +/−
to adjust the volume level of the TV.
U DISC SKIP Press to skip a disc when using a
multi-disc changer.
V RETURN/
EXIT O
Press to return to the previous menu or
exit the menu while the menu or on-screen
guide of the VCR, DVD player, or
satellite tuner is displayed on the TV
screen.
W DISPLAY Press to select information displayed in
the display window, TV screen of the
VCR, satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or MD deck.
Note
In the SCREEN mode, press the button to
display the menu on the TV screen.
a)
See the table for information on the buttons that you can use
to control each component.
b)
The tactile dot is attached to these buttons (H, PRESET+).
Use as a mark of operation.
Notes
•Some functions explained in this section may not work
depending on the model.
•The above explanation is intended to serve as an example
only. Therefore, depending on the component, the above
operation may not be possible or may operate differently
than described.
X CLEAR Press to
− clear a mistake when you press the
incorrect numeric button.
− return to continuous playback, etc. of
the satellite tuner or DVD player.
>10 Press to select
− track numbers over 10 of the VCR,
satellite tuner, CD player or MD deck.
− channel numbers of the Digital CATV
terminal.
D.TUNING Press to enter direct tuning mode.
Y 2CH/
A.DIRECT
Press to select sound field or to switch the
audio of the selected input to analog
signal without any adjustment.
Z A.F.D. Press to select sound field.
wj SHIFT Press to light up the button. It changes the
remote button function to activate the
buttons with pink printing.
wk TV Press to enable the TV operation.
wl RM SET UP Press to set up the remote.
To Next Page
Loading...
