Sony STR-DA7ES - General; Power Requirements; Power Consumption

3
STR-DA4ES/DA7ES/VA333ES
REMOTE CONTROL RM-US105A
(STR-DA7ES only)
Remote control system Infrared control
Power requirements 3 V DC with two R6
(size-AA) batteries
Dimensions 210 × 45 × 25 mm
Mass (approx.) 95 g excluding batteries
GENERAL
Power requirements 120 V AC, 60 Hz
Power consumption
Models of area code U
STR-DA7ES: 450 W
STR-DA4ES: 420 W
Models of area code CA
STR-DA7ES: 490 VA
STR-DA4ES: 470 VA
Power consumption (during standby mode)
1 W
AC outlets 2 switched, 120 W/1A
Dimensions 430 × 174 × 465 mm
including projecting parts
and controls
Mass (Approx.)
STR-DA7ES: 21.0 kg
STR-DA4ES: 21.0 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Audio/video/control S cord (1)
Control S cord (mini jack) (1)
STR-DA7ES only;
Remote commander RM-TP1 (1)
Base unit RMB-TP1 (1 for RM-TP1)
AC adapter (1 for RM-TP1)
Remote commander RM-US105A (1)
R6 (size-AA) batteries (2)
STR-DA4ES only;
Remote commander RM-LP211 (1)
LR6 (size-AA) batteries (3)
Design and specifications are subject to change
without notice.
STR-VA333ES
AMPLIFIER SECTION
Models of area code TW:
Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
90 W + 90 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT
1)
: 100 W + 100 W
CENTER
1)
: 100 W
SURR
1)
: 100 W + 100 W
SURR BACK
1)
: 100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1)
: 90 W + 90 W
CENTER
1)
: 90 W
SURR
1)
: 90 W + 90 W
SURR BACK
1)
: 90 W + 90 W
1) Depending on the sound field settings and the
source, there may be no sound output.
Models of area code CEL, KR:
Power Output
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
2)
90 W + 90 W
3)
(4 ohms 1 kHz, THD 0.7 %)
90 W + 90 W
2)
80 W + 80 W
3)
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
FRONT
4)
: 100 W + 100 W
CENTER
4)
: 100 W
SURR
4)
: 100 W + 100 W
SURR BACK
4)
: 100 W + 100 W
(4 ohms 1 kHz, THD 0.7 %)
FRONT
4)
: 90 W + 90 W
CENTER
4)
: 90 W
SURR
4)
: 90 W + 90 W
SURR BACK
4)
: 90 W + 90 W
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT
4)
: 90 W + 90 W
CENTER
4)
: 90 W
SURR
4)
: 90 W + 90 W
SURR BACK
4)
: 90 W + 90 W
(4 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT
4)
: 80 W + 80 W
CENTER
4)
: 80 W
SURR
4)
: 80 W + 80 W
SURR BACK
4)
: 80 W + 80 W
2) Measured under the following conditions:
Models of area code CEL: 230 V AC, 50 Hz
3) Measured under the following conditions:
Models of area code KR: 220 V AC, 60 Hz
4) Depending on the sound field settings and the
source, there may be no sound output.