2-17 (E)
VPL-EX100
Menu Title Item Name Memory Name
Set
Memory
Sub
Micro
Memory
No
Memory
Status
Memory
Picture Memory
All Channels
Dynamic Standard Presen Game Living Cinema
Operation Status ON
IR Receiver
ID Mode
Security Lock OFF
Panel Key Lock OFF
Connection Power Network Setting
IP Address Setup
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Apply
MAC Address
Input-A Signal Sel. AUTO
Color System AUTO
Standby Mode Low
Power Saving OFF
Direct Power On OFF
Installation Image Flip OFF
Installation Attitude
Right Side UP
High Altitude OFF
Auto Keystone AUTO
Information Model Name
Display only
Serial Number
Display only
fH
Display only
fV
Display only
signal info
Display only
signal info
Display only
Main ROM Version
Display only
NVM Version
Display only
Sub ROM Version
Display only
Network ROM Version
Display only
Lamp Timer
Display only
Operation Timer
Display only
Prev. Lamp Timer
Display only
W/B Gain R
G
B
Bias R
G
B
*1: “Phase, Pitch, Shift H/V, Over Scan” in the “Adjust Signal” menu have the initial value respectively in accordance with the input signal (PRESET MEMORY
No.).
*2: For CN model, this parameter is “50”.
n
There are nonadjustable items in accordance with the input signal.
(To page 2-19 (E))
To Next Page
Loading...
