ViDanteCardUser&SetupGuideV1.1
Status: The Status tab is used to view information
about a Dante dev ice, this information may be
required for trouble shootingand checking software /
firmwareisup‐to‐date.
Device Config
: This tab on the device view allows
viewing and editing of the following device specific
parameters.
RenameDevi ce:AllowsrenamingoftheDantedevice.
SampleRate:48K–thisisfixedandcannotbeedited.
Latency:Allowsselectionofanappropriatelatency.
NOTE: The 0.15 msec setting is unavailable on Vi
D
antecardsastheseincludeaninternalswitch.
FactoryReset:AllowsremoterebootoftheDanteinterfaceandtoreapplyfactorysettings.Following
a reboot it is recommended to power‐cycle the console including disconnection of the AC power
cord.FactoryResetwipesthefollowingdeviceconfigurationset
tings:
User‐defineddevicename
User‐definedchannellabels
Clockconfiguration(clockmaster/externalclockmastersetting)
StaticIPaddresses
Redundancyconfiguration
Sampleratesetting(includingpull‐up/down)
Latencysetting
Anyexistingaudioroutes
To Next Page
Loading...
Need help?
General
