6.5.4: BUSSES
INPUT CHANNEL > TOUCHSCREEN > BUSSES BLOCK
The Busses section of the input channel vistonics touch screen signal path provides access to all Aux and Group
contributions in the VST area, The Touch Screen block graphic shows activated Aux levels in orange and group
routings in Green. The controls vary depending on whether you are working on Auxiliaries or groups.
Auxiliary Send Level
Adjust the send level from the input channel to the numbered Aux Buss.
The Orange bars in the buss touch screen areas show also aux send levels. The control display includes post / pre-
fade routing of the aux buss.
Auxiliary Send On
Enables the numbered aux send from the input channel.
The corresponding aux level bar in the buss touch screen area is highlighted orange when the aux send is enabled.
To Next Page
Loading...
Need help?
General
