6.5.1: INPUT BLOCK
INPUT CHANNEL > TOUCHSCREEN > INPUT BLOCK
Phantom Power
Apply Phantom Power (+ 48V) to a mic input XLR patched to this input.
When phantom power is applied to this channel's input, the '48V' indicated (touch screen input section) is
highlighted in red.
Phase Invert
Invert the phase of audio through this channel.
When phase invert is active, the phase symbol in the input section of the touch screen is highlighted blue.
Input Patch
Activate input patching selection on touch screen.
The input patch selection screen will give you access to all available inputs / sources, both external (local I/O,
Stage Box, MADI, and so on) and internal (Lexicon eects). If an input channel is paired, you will also have to
option to select L or R assignment from the same screen. The IN 1 and IN 2 field text areas will show the selected
source.
Channel Label
Activate channel labelling functionality on main touch screen.
This control brings up the standard ASCII keyboard display and colour selector in order to label the channel. You
can specify short and long channel names, and a label colour. You can also use a connected USB keyboard if
available.
Delay Fine Adjust
Fine adjustment of the channel delay time.
Adjusts overall delay time in small steps. The delay units (feet, meters, seconds etc) of adjustment can be
changed in the main Settings screen, via the [MENU] button.
Delay Adjust
Adjustment of the channel delay time.
Adjusts overall delaytime. The delay units (feet, meters, seconds etc) can be changed in the main Settings screen,
via the [MENU] button.
To Next Page
Loading...
Need help?
General
