SoundCraft Vi5000 User Manual

Option Cards (Local Rack/Compact Stagebox)
ADAT CARD
The ADAT card provides two
optical eight-channel ADAT
inputs and outputs, with 48
kHz operation. Optical inputs
and outputs are provided on
Toslink connectors and can be
used to record to, for example,
an Alesis HD-24 hard disk
recorder or other device with
ADAT inputs and outputs, and
receive playback audio.
ViO-ADAT
PART NUMBER:
Dolby E CARD
The Dolby E card decodes
the audio channels from
a Dolby E or Dolby Digital
stream and allows them to
be patched into separate
inputs on the console for
mixing. Each card provides
two full decoder sections,
and can dramatically save
external hardware cost,
space and weight.
ViO-DOLBY
PART NUMBER:
3G SDI CARD
The 3G SDI card can
de-embed up to 16 audio
channels from an SDI (Serial
Digital Interface) stream, and
re-embed them (Embedder/
DeEmbedder card only) back
on to the stream for onward
transmission in a broadcast
environment, saving high
costs of external units and,
of course, weight. These
channels may be patched in
to any input as usual.
Two versions of the card are
available: DeEmbed only, or
Embed/DeEmbed
DeEmbed Only ViO-SDI
Embed/
DeEmbed
ViO-SDIO
PART NUMBERS:
TDIF CARD
This card provides
two 8-channel TDIF
I/O interfaces with
48 kHz operation
with wordclock
sync outputs on
BNC connectors.
Inputs and outputs
are provided on
standard 25-pin
D-type connectors
(female).
ViO-TDIF
PART NUMBER:
Local Rack/CSB
4
Vi Stagebox
✘
COMPATIBILITY:
Local Rack/CSB
4
Vi Stagebox
✘
COMPATIBILITY:
Local Rack/CSB
4
Vi Stagebox
✘
COMPATIBILITY:
Local Rack/CSB
4
Vi Stagebox
✘
COMPATIBILITY:

SoundCraft Vi5000 Specifications

General

Brand	SoundCraft
Model	Vi5000
Category	Music Mixer
Language	English